At a glance
- Closing date
- The listing does not give one. Employers often close early when they have enough applicants, so apply soon.
- Where
- Delta, Nigeria
- How to apply
- Directly to the employer by email. The address is in the listing below.
- Similar roles
- 173 other open Skilled Trades & Services roles on the Nigeria board right now.
Linx Networks Ltd is seeking to engage a competent, experienced, and technically proficient Access Control Technician on a project-contract basis for an access control installation project in Warri, Delta State.
The successful candidate will be responsible for the installation, configuration, testing, commissioning, and handover of access control equipment and related infrastructure at the designated project site.
The technician is expected to demonstrate practical experience in electronic security systems, access control hardware, structured cabling, electrical installations, and troubleshooting.
The successful candidate must be disciplined, safety-conscious, detail-oriented, and capable of delivering assigned technical tasks within the agreed project timeline and quality standards established by Linx Networks Ltd.
KEY RESPONSIBILITIES
Access Control System Installation
Install and configure access control devices, including biometric readers, RFID card readers, fingerprint terminals, PIN/keypad readers, and other designated access control equipment.
Install electromagnetic locks, electric strikes, exit buttons, door contacts, break-glass units, and associated door hardware.
Install access control panels, controllers, power supply units, backup batteries, and other system components.
Ensure proper mounting, positioning, alignment, and secure installation of all equipment.
Install and terminate cables between access control devices, controllers, doors, and network infrastructure.
Ensure all installations comply with the approved project design and technical specifications.
Structured Cabling and Electrical Works
Carry out cable routing, trunking, conduit installation, and cable dressing where required.
Terminate, label, and test all cables appropriately.
Ensure proper power connections and polarity for access control devices.
Maintain neat, organised, and professional cable management.
Identify and rectify cable faults, loose connections, short circuits, and other electrical issues.
Coordinate with other technical personnel where installation requires interfacing with existing electrical or network infrastructure.
System Configuration and Programming
Configure access control panels and associated devices.
Assist with controller addressing, network configuration, and device communication.
Configure door access parameters, access permissions, user credentials, and time schedules where applicable.
Assist with integrating access control devices with the designated management software.
Configure communication between controllers, readers, and the central management platform.
Ensure that all installed devices communicate correctly with the central system.
Testing, Troubleshooting and Commissioning
Conduct functional tests on all installed access control devices.
Test door locking and unlocking mechanisms.
Verify RFID, fingerprint, PIN, QR code, or other credential authentication functions as applicable.
Test exit buttons, emergency releases, door sensors, and alarm functions.
Identify and resolve installation and configuration faults.
Conduct final system checks to ensure that all equipment operates according to project specifications.
Report unresolved technical issues to the Project Manager or Technical Lead.
Project Documentation and Reporting
Provide daily progress reports to the assigned Project Manager or Technical Lead.
Document installed equipment, device locations, and cable routes where required.
Maintain records of materials and equipment received, installed, or returned.
Report shortages, damaged equipment, and additional material requirements immediately.
Provide installation photographs and relevant technical documentation.
Assist in preparing system testing and commissioning reports.
Participate in project handover and provide necessary technical explanations to the client\'s representatives.
Site Coordination and Professional Conduct
Work closely with the Linx Networks Ltd project team and other appointed contractors.
Follow all instructions issued by the Project Manager or authorised Technical Lead.
Maintain professionalism when interacting with the client, facility representatives, and other contractors.
Protect client property, installed equipment, and project materials.
Maintain a clean and organised work environment.
Ensure that no unauthorised changes are made to the approved project design or scope.
QUALIFICATIONS AND EXPERIENCE
The ideal candidate should possess:
OND, HND, B.Sc., or relevant technical certification in Electrical/Electronic Engineering, Computer Engineering, Telecommunications, Information Technology, or a related discipline. Equivalent practical experience may be considered.
Minimum of 2–3 years of practical experience in access control installation and implementation.
Demonstrable experience installing biometric access control systems, RFID readers, electromagnetic locks, access control panels, and related devices.
Good understanding of electrical wiring, structured cabling, and basic networking.
Ability to read and interpret installation drawings, wiring diagrams, and technical specifications.
Experience configuring access control controllers and management software.
Good troubleshooting and problem-solving skills.
Ability to work independently and within a project team.
TECHNICAL SKILLS REQUIRED
The candidate should demonstrate practical knowledge of:
Biometric access control systems.
RFID and proximity card readers.
Electromagnetic locks and electric strikes.
Access control panels and door controllers.
Exit buttons and emergency door release systems.
Door contacts and access control accessories.
Structured cabling, cable termination, and testing.
TCP/IP networking and basic IP configuration.
Power supply installation and backup battery connections.
Access control software configuration and device integration.
Fault diagnosis, system testing, and commissioning.
Knowledge of ANPR, QR-based access control, turnstiles, boom barriers, and cloud-based access control systems will be an added advantage.
PROJECT DELIVERABLES
The contracted technician will be expected to deliver the following:
Complete installation of assigned access control equipment.
Proper installation and termination of all associated cabling.
Successful configuration and communication of installed devices.
Functional testing of all installed doors and access control components.
Rectification of installation-related defects identified during testing.
Submission of installation progress reports and relevant photographs.
Submission of equipment installation and testing records.
Participation in final commissioning and client handover.
Completion of all assigned tasks within the approved project schedule.
TOOLS AND EQUIPMENT
The technician is expected to have access to basic personal installation tools, including:
Digital multimeter.
Screwdriver and precision tool sets.
Wire stripper and crimping tools.
Cable tester/network tester.
Drilling machine and appropriate drill bits.
Measuring tape and spirit level.
Laptop for device configuration, where required.
Safety boots, hand gloves, and other appropriate personal protective equipment.
Linx Networks Ltd will clarify which specialised tools, project equipment, and installation materials will be provided by the company.
HEALTH, SAFETY AND SITE REQUIREMENTS
The technician shall:
Comply with all applicable workplace health and safety requirements.
Use appropriate personal protective equipment during installation.
Observe electrical safety procedures when working with power supplies and electrical connections.
Ensure that tools and materials are handled safely.
Avoid unsafe work practices and report potential hazards immediately.
Maintain proper housekeeping at the project site.
Obtain approval before carrying out work that may affect existing electrical, network, or security infrastructure.
CONTRACTUAL EXPECTATIONS AND CONDITIONS
The successful candidate shall:
Be available for the agreed project duration in Warri, Delta State.
Resume at the project site on the agreed mobilisation date.
Work according to the project schedule and instructions from Linx Networks Ltd.
Maintain confidentiality regarding the company\'s business, client information, project specifications, system configurations, passwords, and other sensitive information.
Not disclose project information, photographs, drawings, or technical documentation to unauthorised persons.
Not negotiate additional project costs or make commercial commitments to the client without written authorisation from Linx Networks Ltd.
Not remove, transfer, or use project materials for personal purposes without approval.
Report any project challenges, delays, equipment damage, or material shortages promptly.
Ensure all assigned responsibilities are completed to the satisfaction of the company\'s authorised project representative.
Correct installation defects attributable to their workmanship within the agreed defect rectification period, at no additional labour cost.
PERFORMANCE AND QUALITY EXPECTATIONS
The technician\'s performance will be evaluated based on:
Quality and neatness of installation.
Technical accuracy and functionality of installed systems.
Compliance with approved installation specifications.
Ability to meet agreed project milestones.
Effective troubleshooting and fault resolution.
Professional conduct and teamwork.
Accuracy of project documentation and reporting.
Compliance with safety and confidentiality requirements.
Any substandard installation, unauthorised modification, negligence, or failure to follow approved technical instructions may result in corrective action or termination of the engagement in accordance with the contract terms.
REMUNERATION AND ENGAGEMENT TERMS
The engagement shall be on a project-based contract arrangement.
The following terms shall be agreed and documented before commencement:
Contract Fee: To be communicated and agreed with the successful candidate.
Engagement Duration: Based on the approved project implementation schedule.
Work Location: Warri, Delta State.
Accommodation: To be agreed before mobilisation.
Transportation/Mobilisation: To be agreed before commencement.
Feeding/Local Logistics: To be agreed before commencement.
Payment Schedule: As stipulated in the signed contract agreement and subject to satisfactory completion of agreed milestones.
Project Extension: Any extension beyond the agreed project duration must receive prior approval from Linx Networks Ltd.
The technician shall not be considered a permanent employee of Linx Networks Ltd by virtue of this project-specific engagement.
CONFIDENTIALITY AND INTELLECTUAL PROPERTY
All project drawings, technical designs, configurations, software credentials, installation procedures, documentation, and other materials provided by Linx Networks Ltd shall remain the company\'s or its client\'s property, as applicable.
The technician shall:
Keep all client and company information confidential.
Not reproduce or distribute project documentation without written authorisation.
Not use client information or project access credentials for unauthorised purposes.
Return all company-issued equipment, documents, access cards, and other materials upon completion or termination of the engagement.
These obligations shall survive the conclusion of the contract.
REPORTING AND SUPERVISION
The contracted technician shall report directly to the assigned Project Manager or Technical Lead of Linx Networks Ltd.
All project-related activities, technical decisions, material requests, scope changes, and client instructions must be communicated through the designated project reporting structure.
The technician shall not independently approve variations, additional costs, or changes to the agreed project scope.
Only shortlisted candidates will be contacted for further assessment and engagement discussions.
Minimum qualifications
BA/BSc/HND , OND
How to apply
Interested candidates should submit:
Updated Curriculum Vitae (CV).
Brief description of previous access control installation projects handled.
Relevant technical certifications, where available.
References or evidence of previous installation work, where available.
Current location and availability for mobilisation to Warri, Delta State.
Expected project contract fee.
To: careers@linxnet.com.ng
Application Subject: Contract Access Control Technician – Warri Project
Similar open roles
Let RezSync apply to roles like this.
Set up your search once. RezSync matches you to open roles like this one (this one too, if it fits your CV and is still open) and sends a tailored application for each, with a full log and a pause switch you own.
More applications for less effort. Employers decide who they interview; RezSync does not guarantee a job.
Prefer to apply yourself? Apply on myjobmag.com