At a glance
- Closing date
- 1 December 2026 (30 days left)
- Where
- Mombasa, Kenya
- How to apply
- On brightermonday.co.ke, where the employer takes applications.
- Similar roles
- 72 other open Skilled Trades & Services roles on the Kenya board right now.
- This employer
- Amentum has 47 open roles on RezSync.
Job Responsibilities:
Prepare surfaces for painting and protective coatings by sanding, scuffing, scraping, wire brushing, grinding, stripping, or abrasive blasting.
Perform sandblasting operations to remove rust, corrosion, old coatings, marine growth, and other contaminants from metal and structural surfaces.
Apply primers, sealers, paints, stains, varnishes, enamels, epoxies, and specialty marine coatings using brushes, rollers, and spray equipment.
Prepare bare wood, metal, and other substrates for finish coats by applying appropriate primers and sealers.
Protect surrounding equipment and surfaces using masking materials, drop cloths, plastic sheeting, and tape.
Fill cracks, holes, joints, and surface imperfections using caulk, putty, plaster, or other approved fillers.
Remove and reinstall fixtures, hardware, switch covers, lighting components, and similar items as required to complete painting activities.
Smooth finished surfaces using sandpaper, steel wool, scrapers, brushes, or power sanding equipment to achieve required finish quality.
Waterproof structures and surfaces using approved waterproofing membranes, sealants, and caulking materials.
Read and interpret work orders, technical drawings, specifications, and supervisor instructions to determine project requirements.
Inspect completed work to ensure compliance with quality standards and coating specifications.
Safely erect and work from ladders, scaffolding, staging, and elevated work platforms when required.
Operate and maintain painting, blasting, and surface preparation equipment in accordance with manufacturer recommendations and safety procedures.
Maintain a clean and organized work area while complying with all environmental, health, and safety regulations.
Utilize appropriate personal protective equipment and follow hazardous material handling procedures.
Support vessel maintenance, repair, and preservation activities as assigned.
Perform other job-related duties as assigned that are consistent with the nature and level of the position.
Required Qualifications:
Minimum of two (2) years of experience in paint preparation, abrasive blasting, sanding, scuffing, painting, or a related field.
High school diploma or equivalent.
Experience operating painting and surface preparation equipment.
Must be in possession of a valid passport and be able to travel internationally.
Passport must be valid for a minimum of one (1) year or more at the time of hiring.
Ability to obtain country-specific visas per the U.S. Department of State Foreign Clearance Guide.
Ability to successfully pass contract medical requirements and maintain compliance throughout the duration of deployment.
Must be able to obtain and maintain facility credentials/authorization.
Must be able to speak, read, and comprehend English.
Preferred Qualifications:
Prior experience working in an austere OCONUS (Outside the Continental United States) environment with a multi-national workforce
A valid driver’s license to legally operate a motor vehicle. Valid country driver’s license. and passport.
Knowledge of marine surface preparation, corrosion control, and protective coating systems.
Experience preparing and painting marine vessels, industrial equipment, buildings, and structural components.
Knowledge of abrasive blasting techniques and coating application standards.
Ability to recognize occupational hazards associated with painting and blasting operations and implement appropriate safety precautions.
Experience working independently with sound judgement and decision making skills.
Job Responsibilities:
Prepare surfaces for painting and protective coatings by sanding, scuffing, scraping, wire brushing, grinding, stripping, or abrasive blasting.
Perform sandblasting operations to remove rust, corrosion, old coatings, marine growth, and other contaminants from metal and structural surfaces.
Apply primers, sealers, paints, stains, varnishes, enamels, epoxies, and specialty marine coatings using brushes, rollers, and spray equipment.
Prepare bare wood, metal, and other substrates for finish coats by applying appropriate primers and sealers.
Protect surrounding equipment and surfaces using masking materials, drop cloths, plastic sheeting, and tape.
Fill cracks, holes, joints, and surface imperfections using caulk, putty, plaster, or other approved fillers.
Remove and reinstall fixtures, hardware, switch covers, lighting components, and similar items as required to complete painting activities.
Smooth finished surfaces using sandpaper, steel wool, scrapers, brushes, or power sanding equipment to achieve required finish quality.
Waterproof structures and surfaces using approved waterproofing membranes, sealants, and caulking materials.
Read and interpret work orders, technical drawings, specifications, and supervisor instructions to determine project requirements.
Inspect completed work to ensure compliance with quality standards and coating specifications.
Safely erect and work from ladders, scaffolding, staging, and elevated work platforms when required.
Operate and maintain painting, blasting, and surface preparation equipment in accordance with manufacturer recommendations and safety procedures.
Maintain a clean and organized work area while complying with all environmental, health, and safety regulations.
Utilize appropriate personal protective equipment and follow hazardous material handling procedures.
Support vessel maintenance, repair, and preservation activities as assigned.
Perform other job-related duties as assigned that are consistent with the nature and level of the position.
Required Qualifications:
Minimum of two (2) years of experience in paint preparation, abrasive blasting, sanding, scuffing, painting, or a related field.
High school diploma or equivalent.
Experience operating painting and surface preparation equipment.
Must be in possession of a valid passport and be able to travel internationally.
Passport must be valid for a minimum of one (1) year or more at the time of hiring.
Ability to obtain country-specific visas per the U.S. Department of State Foreign Clearance Guide.
Ability to successfully pass contract medical requirements and maintain compliance throughout the duration of deployment.
Must be able to obtain and maintain facility credentials/authorization.
Must be able to speak, read, and comprehend English.
Preferred Qualifications:
Prior experience working in an austere OCONUS (Outside the Continental United States) environment with a multi-national workforce
A valid driver’s license to legally operate a motor vehicle. Valid country driver’s license. and passport.
Knowledge of marine surface preparation, corrosion control, and protective coating systems.
Experience preparing and painting marine vessels, industrial equipment, buildings, and structural components.
Knowledge of abrasive blasting techniques and coating application standards.
Ability to recognize occupational hazards associated with painting and blasting operations and implement appropriate safety precautions.
Experience working independently with sound judgement and decision making skills.
Similar open roles
Get applications like this ready in minutes.
Set up your search once. RezSync matches you to open roles like this one and prepares a tailored CV and cover letter for each. Roles that take applications on brightermonday.co.ke need one link from you; where employers take email applications, RezSync sends them for you.
More applications for less effort. Employers decide who they interview; RezSync does not guarantee a job.
Prefer to apply yourself? Apply on brightermonday.co.ke