Thermo-Fluids Engineer

Role Overview

We are looking for a Thermo-Fluids Engineer to own the thermal and fluid performance of our reactor and airflow systems. You will work at the centre of the design loop: modelling airflow, pressure drop, heat transfer and energy use, validating those models against test data, and turning the results into design decisions that improve capture performance and reduce energy per tonne of CO₂.

Key Responsibilities

Airflow and pressure-drop design

Design and optimise air distribution hardware (diffusers, plenums, nozzles, louvres and ducting) to achieve uniform flow across sorbent beds with minimum pressure loss.

Model flow through porous sorbent structures, including resistance characterisation, flow uniformity and suppression of recirculation and draft effects.

Size fans and blowers against system pressure-drop budgets, and identify the dominant loss contributors in the flow path.

Heat transfer and thermal systems

Specify and size insulation systems for vessels operating under thermal cycling and vacuum

Design steam distribution and purging strategies, and eliminate dead zones where steam or air does not reach the sorbent.

CFD and simulation

Set up, run and post-process CFD simulations (steady and transient, including conjugate heat transfer) and ensure meshes, boundary conditions and solver settings are defensible.

Establish simulation workflows and templates that other engineers can reuse, and document assumptions and limitations clearly.

Use hand calculations and spreadsheet models to sanity-check simulation results and to explore design space quickly.

Test, instrumentation and validation

Plan and run experiments on pilot and test systems, and specify the instrumentation (pressure, temperature, flow and humidity sensors) needed to capture the right data.

Diagnose discrepancies between predicted and measured performance, including measurement errors such as probe orientation and sensor placement.

Analyse operating data from field systems to track performance degradation and feed lessons back into design.

Contribute to technical reports, design reviews and updates for leadership, investors and partners, communicating conclusions clearly and quantitatively.

Qualifications

Bachelor’s degree in Mechanical Engineering

Strong grounding in fluid mechanics, heat and mass transfer, and thermodynamics, with the ability to apply them to real hardware.

Hands-on experience with a commercial CFD package (e.g., Ansys Fluent or equivalent)

is preferred but not a requirement to apply for the role.

Working knowledge of CAD (e.g. SolidWorks, Inventor, etc)

Proficiency in building engineering calculation tools in Excel or Python.

Clear technical writing and the ability to present findings concisely, with conclusions first.

Minimum qualifications

BA/BSc/HND

How to apply

Interested and qualified? Go to Octavia Carbon on octaviacarbon.bamboohr.com to apply

Similar open roles

• Assistant Estimator at Burhani Engineers LtdBurhani Engineers Ltd · Nairobi
• Assistant Estimator at Burhani Engineers LtdBurhani Engineers Ltd · Nairobi
• MEP EngineerPeoplelink Consultants Ltd · Kenya
• Fiber Rollout (HOD) at Fireside Engineering GroupFireside Engineering Group · Nairobi
• County WSP Capacity Strengthening Officer – Integrated WASH and Water ServicesRural Water Managament Solutions · Marsabit
• Electrical EngineerHoward Humphreys (East Africa) Limited · Nairobi